Mold Remediation
Containment, removal of affected drywall and insulation, HEPA vacuuming and antimicrobial treatment of what stays.Containment, removal of affected drywall and insulation, HEPA vacuuming and antimicrobial treatment.
Mold remediation · Miami-Dade County
Mold Removal & Remediation in Miami
We find the moisture that's feeding it, seal off the area, take the mold out, and have an independent assessor confirm it's gone. Homes, condos and commercial spaces.We find the moisture feeding it, seal off the area, take the mold out, and have an independent assessor confirm it's gone.
- Owner-licensed and based in Miami-Dade, not a franchiseOwner-licensed, Miami-based, not a franchise
- Full containment, so spores don't spread room to roomFull containment, so spores don't spread
- The leak or humidity source fixed, not painted overThe moisture source fixed, not painted over
- Photos and paperwork ready for your insurance claimPhotos and paperwork for your insurance claim
FL Mold Remediator MRSR2789FL license MRSR2789
Written scope before any work startsWritten scope first
Independent clearance testingIndependent clearance testing
Insurance claim documentationInsurance claim documentation
Services
Mold removal services for Miami homes and buildings
Every job starts with finding out why the mold is there. Otherwise it comes back, usually within a rainy season.
Black Mold Removal
Dark growth on walls, ceilings or behind cabinets handled under full containment with negative air pressure.Dark growth on walls, ceilings or behind cabinets, handled under full containment.
AC & Air Duct Mold
Air handlers, drain pans and ductwork cleaned and treated, the most common source of that musty smell in Miami.Air handlers, drain pans and ductwork cleaned and treated. The usual source of a musty smell.
Water Damage Drying
Burst pipe, roof leak or AC overflow dried out with air movers and dehumidifiers before mold takes hold.Burst pipe, roof leak or AC overflow dried out before mold takes hold.
Storm & Flood Mold Cleanup
After hurricane water intrusion or flooding: tear-out of soaked materials, drying and treatment of the structure.Tear-out of soaked materials, drying and treatment after hurricane water intrusion.
Attic Mold Removal
Roof-deck sheathing and rafters cleaned and treated after a leak, and the vent or roof problem behind it named.Roof-deck sheathing and rafters treated, and the leak or vent problem behind it named.
Our process
How a mold removal job goes, start to clearanceHow a job goes, start to clearance
- 01
Find the source
We walk the property with moisture meters and thermal imaging to map what's wet and why.Moisture meters and thermal imaging map what's wet and why.
- 02
Contain
Plastic barriers and negative air machines keep spores inside the work area.Plastic barriers and negative air keep spores inside the work area.
- 03
Remove
Contaminated materials come out bagged. Remaining surfaces are HEPA-vacuumed and treated.Contaminated materials come out bagged. The rest is HEPA-vacuumed and treated.
- 04
Dry & fix
The structure is dried to normal readings and the moisture source is repaired or flagged.The structure is dried and the moisture source repaired or flagged.
- 05
Clear
An independent licensed assessor tests the air and surfaces before the barriers come down.An independent assessor tests before the barriers come down.
Why Miami
Miami air does half the work for mold
Mold needs moisture and something to eat. Drywall, wood and dust are the food. Our climate supplies the rest: one AC failure or slow leak can push indoor humidity past the point where growth starts, and wet materials can begin growing mold in 24 to 48 hours.One AC failure or slow leak can push indoor humidity past the point where growth starts. Wet materials can begin growing mold in 24 to 48 hours.
Get My Free QuoteIndoor relative humidity, % RH% RH
- 30–50%
- The indoor range the EPA recommendsEPA's recommended range
- 60%+
- Where mold growth becomes likelyMold growth becomes likely
- 70%+
- Miami's average outdoor humidityMiami's average outdoor air
Sources: EPA, A Brief Guide to Mold, Moisture and Your Home; NOAA climate normals for Miami.
Estimated prices
What mold removal costs in Miami
Ranges for the jobs we're called out for most. They're estimates built from published Florida and national pricing; the written quote after we've seen the property is the number that counts.
Full price guide- Small area, one drywall section
- $500–$1,500
- Bathroom
- $500–$2,000
- Black mold, typical job
- $2,000–$10,000
- AC coil cleaned in place
- $100–$400
- Water damage, one room dried
- $1,500–$5,000
- Attic, partial
- $1,500–$6,000
Estimates only, reviewed October 8, 2026. Square footage, access and what has to be torn out move the final figure.
Service areas
Mold removal across Miami-Dade
From bayfront condos to single-family homes out west. If you're in the county, we come to you.
- Downtown Miami
- Brickell
- Coral Gables
- Coconut Grove
- Miami Beach
- Little Havana
- Wynwood
- Kendall
- Doral
- Hialeah
- Miami Lakes
- Aventura
- North Miami
- Pinecrest
- Key Biscayne
- Cutler Bay
- Homestead
FAQ
Mold removal questions we hear every week
How much does mold removal cost in Miami?
It depends on how much area is affected, what materials have to come out, and how hard the spot is to reach. A bathroom wall is a very different job from an attic or a whole AC system. We give you a written quote after looking at it, before any work starts. Typical ranges are in our Miami mold removal price guide.
Do you do the mold testing too?
No, and that protects you. Florida law (s. 468.8419) bars a mold assessor from remediating a property it assessed in the past 12 months, and a remediator from assessing one it remediated. Testing and clearance are done by an independent licensed mold assessor, and we can coordinate that for you.
Can I stay home during remediation?
Often yes, when the work area can be sealed off from the rest of the home. For larger jobs or AC system work we'll tell you up front if it makes sense to be out.
Will my homeowners insurance cover it?
It depends on your policy and what caused the moisture. Sudden events like a burst pipe are treated differently from long-term leaks. We document everything with photos and moisture readings so your adjuster has what they need.
Can't I just bleach it?
On tile or glass, cleaning works. On drywall, wood and other porous materials, the growth runs below the surface and comes back if the moisture is still there.
About us
A local Miami crew built around mold
Miami Mold Removal is a mold remediation company working across Miami-Dade. Mold and moisture are the core of the work. That means the right containment gear on every truck and a crew that has seen what South Florida humidity does to block homes, high-rise condos and everything between.Miami Mold Removal works across Miami-Dade, and mold and moisture are the core of the work. You get a straight answer on what comes out and what can be saved, a written scope before we start, and a clearance report when we finish.
You get a straight answer on what needs to come out and what can be saved, a written scope before we start, and a clearance report when we finish.
The owner runs the company himself and holds Florida's mold remediator license in his own name. He also teaches state-approved continuing-education classes that licensed mold professionals take to renew their licenses, so the methods on your job are the ones he teaches. One office in central Miami-Dade keeps Coral Gables, Hialeah and the beaches a short drive away. More about us.
The owner holds Florida's mold remediator license himself and teaches the state-approved classes other mold pros take to renew theirs. More about us.
See it or smell it? Get it looked at this week.
Mold doesn't stay the same size. Send us the address and we'll call to set up a visit.